Mesh analysis Electronic Circuit Theory

Mesh analysis Electronic Circuit Theory


In the previous tutorial we saw that complex circuits such as bridge or T-networks can be solved using "Kirchoff's Circuit Laws". While Kirchoff´s Laws give us the basic method for analysing any complex electrical circuit, there are ways of improving upon this method by using Mesh Current Analysis or Nodal Voltage Analysis that results in a lessening of the math's involved and when large networks are involved this reduction in maths can be a big advantage.

For example, consider the circuit from the previous section.
Mesh Analysis Circuit
One simple method of reducing the amount of math's involved is to do Kirchoff´s First Current Law equations to determine the currents, I1 and I2 flowing in the two resistors and there is no need to calculate the current I3 as its just the sum of I1 and I2. Then the Second Voltage Law simply becomes:
Equation No 1 : 10 = 50I1 + 40I2
Equation No 2 : 20 = 40I1 + 60I2
therefore, one line of math's calculation have been saved.
Mesh Current Analysis
A more easier method of solving the above circuit is by using Mesh Current Analysis or Loop Analysis which is also sometimes called "Maxwell´s Circulating Currents" method. Instead of labelling the branch currents we need to label each "closed loop" with a circulating current. As a general rule of thumb, only label inside loops in a clockwise direction with circulating currents as the aim is to cover all the elements of the circuit at least once. Any required branch current may be found from the appropriate loop or mesh currents as before using Kirchoff´s method.
For example: : i1 = I1 , i2 = -I2 and I3 = I1 - I2
We now write Kirchoff´s second voltage law equations in the same way as before to solve them but the advantage of this method is that it ensures that the information obtained from the circuit equations is the minimum required to solve the circuit as the information is more general and can easily be put into a matrix form.
For example, consider the circuit from the previous section.

These equations can be solved quite quickly by using a single mesh impedance matrix Z. Each element ON the principal diagonal will be "positive" and is the total impedance of each mesh. Where as, each element OFF the principal diagonal will either be "zero" or "negative" and represents the circuit element connecting all the appropriate meshes. This then gives us a matrix of:

Where:
[ V ] gives the total battery voltage for loop 1 and then loop 2.
[ I ] states the names of the loop currents which we are trying to find.
[ R ] is called the resistance matrix.
and this gives I1 as -0.143 Amps and I2 as -0.429 Amps
As : I3 = I1 - I2
The current I3 is therefore given as : -0.143 - (-0.429) = 0.286 Amps
which is the same value of 0.286 amps, we found using Kirchoff´s circuit law in the previous tutorial.
Page Summary.
This "look-see" method of circuit analysis is probably the best of all the circuit analysis methods with the basic procedure for solving Mesh Current Anaysis equations is as follows:
1. Label all the internal loops with circulating currents. (I1, I2, ...IL etc)

2. Write the [ L x 1 ] column matrix [ V ] giving the sum of all voltage sources in each loop.

3. Write the [ L x L ] matrix, [ R ] for all the resistances in the circuit as follows;
R11 = the total resistance in the first loop.
Rnn = the total resistance in the Nth loop.
RJK = the resistance which directly joins loop J to Loop K.
4. Write the matrix or vector equation [V] = [R] x [I] where [I] is the list of currents to be found.